How to configure a Router

How to configure a Router

The purpose of a router is to have more than one computer to access the Internet connect through a broadband connection. Routes and forward information. Imagine four people in a house and everyone has a laptop in his bedroom. Everyone wants to use the Internet. It would be costly and time consuming, four different themes, perform four requests for access to the Internet for the same property and pay four separate bills. This is where a router instead of all four methods, all you have to do is ask the Internet once. If you get an internet connection, the router is used to distribute the Internet for different computers. Routers can be used wired or wirelessly. Follow the instructions to configure the router:
Tools Needed

* Wired or wireless router
* Modem or Internet connection
* At least two computers

Materials Needed

Network Cable *

Instructions

A. Connect the router to a power source.
Second Turn off the router.
Third Connect the modem or router connected to all. Slot WAN, Internet or Uplink
4th Turn the modem off and then on again. This ensures that the modem detects the router.
5th By connecting the network cable, connect the computer to connect to a cable from a port on the router to the LAN port on your computer. Even if you configure a wireless router, this has nothing to do, and then switch to a wireless connection.
6th On your computer, open your browser.
7th Enter the address of the router for network management. This is usually provided in the documentation for your router.
8th You will be asked for a user name and password. Force if.'s Documentation for the router Do not forget to change the default password and enter your account for security reasons.
9th In the configuration section of the router, enter the data of your Internet connection. If you have a DSL connection, try PPPoE username and password. If your ISP gives you a static IP address, you need the static IP address in the router's configuration.
10th If a wireless router, change the network name, which was created by the factory and enter the network name.
11th Make sure that the network connection is correct. To check this, see if the computer has obtained the IP address from the router.
12th Open the web browser on the computer and try to go to a site like yahoo.com.
13th Once you have created the first computer, you can go ahead and connect the other teams. If the wireless connection, make sure that all the names are the same as the network of the router on any computer on the network.

Tips & Warnings

* If you enter the configuration to save not forget.
* Always use a password to protect your network